Common methods of restumping

The Common Methods Of Re-Stumping A House

Re-stumping is a repair method used to salvage the situation when houses have issues with the foundation. The foundation repair method, also known as underpinning, is used to prevent the foundation for suffering more cracks due to an unstable settlement. The instability weakens the foundation making it unable to support the weight of the house. In senses, re-stumping efficiently increasing the foundation’s load bearing capacity thus stabilizing to support the above property.

Article contributed by: Best reblocking company

Which Re-Stumping Method Can Be Used?

•    Mass Pouring

 It is the most common foundation underpinning method used on foundations that have a shallow depth. It works for foundations that do not require too much digging only weak soil is excavated underneath the foundation and is replaced with mass concrete. Mass pouring is the cheapest re-stumping methods because it required simple foundation repair engineering. 

•    Pilling

The method can be viewed as one that involves driving concrete nails into the ground to reinforce the existing foundation. The nails, known as piles, are driven in equal distance into the ground along either side of the wall and are connected using steel or concrete pins punched through the walls. It is an efficient repair option for houses built on foundations in waterlogged areas.

•    Beam And Base

It is a method that combines the use of mass concrete base with beams. The method places a new based underneath with the foundation resting on beams. The beams support the load of the foundation as they transfer the excess to the mass concrete base where it is evenly distributed. The beam and base re-stumping methods only work for specific foundation types while also factoring in the nature and weight of the structure erected on the foundation.

•    Resin Injection

foundartional repairs

The method is simple though an advanced foundation repair engineering. It involves drilling holes into the ground, and then the resin is injected into the holes and absorbed into the soil. As the resin dries, it expands binding with the soil thus causing it to be a stable ground that can support the foundation which in turn supports the weight of the house.

•    Soil Grouting

It is an underpinning method that works using the same principles of resin injection. However, the method uses a special polymer mortar instead of resin. The polymer is designed to bind granular soil together that changing the ground offer a more stable foundation support. Soil Grouting is an efficient re-stumping method for houses build on shifting soils such as sandy and loamy soils.

We spoke to Cheap restumping in melbourne and they revealed :

Choice of re-stumping methods to be used depends on the type of foundation of the house. Each method is effective to address the problems of a particular foundation; none is a one-do-it-all method. The foundation repair will thus call for the following considerations:

•    Knowing the type of foundation

•    The cause of foundation damage

•    The depth of the excavation and the site’s restraints

•    How long the foundation stayed stable after completion of original construction

•    Knowing the local foundation repair and construction regulations

The cost of a re-stumping method will be the last thing to consider because each method is suitable for a particular type of foundation. Make sure you contractor is Master Builders Nevertheless, each method costs differently based on its application and simplicity. For instance, the cost of resin injection may be affordable or expensive depending on the amount of resin used.